Manual Transmission ATF Fluid Filling Dispenser System with 8 Adapters
Item No.: CT5AK10L
The unit is designed to fill fluid in transmission, differentials and transfer cases.
Open the filling cap on the reservoir.
Fill in dispensing fluid tank capacity is 9.5L.
Find the suitable adaptor from the selection and connect to the vehicle.
Connect the adaptor with dispensing hose.
Push-pull the dispensing handle to begin the operation.
The unit is designed to fill fluid in transmission, differentials and transfer cases. Open the filling cap on the reservoir. Fill in dispensing fluid tank capacity is 9.5 Liter. Find the suitable adapter from the selection and connect to the vehicle. Connect the adapter with dispensing hose. Push-pull the dispensing handle to begin the operation.
• AT 101: Ford 1/8 NPT
• AT 102: Universal Nozzle (BMW, Honda, Nissan and ETC)
• AT 103: VW, Audi
• AT 104: VW, Audi, Porsche
• AT 105: VW, Audi, Mini Cooper 10×1.0
• AT 106: Benz 722.9 12×1.5
• AT 107: VW, Audi DSG 24×1.5
• AT 108: VW, Audi CVT 22×1.5
Manual operated pump to fill seal transmission system.
Pump stroke to minimize leakage when reaching overflow point.
Fluid control valve to shut off dispensing immediately.
Large transparent tank to see through fluid level.
Attention Before Operating
1. Viscosity Range: up to SAE 140
2. Output Capacity: 70 cc / cycle
Wear eye protection and keep skin contact to a minimum. If brake fluid enters eyes rinse with plenty of water and seek medical advice. If swallowed seek medical advice immediately.
Manual Transmission ATF Fluid Filling Dispenser System with 8 Adapters
Item No.: CT5AK10L
The unit is designed to fill fluid in transmission, differentials and transfer cases.
Open the filling cap on the reservoir.
Fill in dispensing fluid tank capacity is 9.5L.
Find the suitable adaptor from the selection and connect to the vehicle.
Connect the adaptor with dispensing hose.
Push-pull the dispensing handle to begin the operation.
Description
The unit is designed to fill fluid in transmission, differentials and transfer cases. Open the filling cap on the reservoir. Fill in dispensing fluid tank capacity is 9.5 Liter. Find the suitable adapter from the selection and connect to the vehicle. Connect the adapter with dispensing hose. Push-pull the dispensing handle to begin the operation.
• AT 101: Ford 1/8 NPT
• AT 102: Universal Nozzle (BMW, Honda, Nissan and ETC)
• AT 103: VW, Audi
• AT 104: VW, Audi, Porsche
• AT 105: VW, Audi, Mini Cooper 10×1.0
• AT 106: Benz 722.9 12×1.5
• AT 107: VW, Audi DSG 24×1.5
• AT 108: VW, Audi CVT 22×1.5
Manual operated pump to fill seal transmission system.
Pump stroke to minimize leakage when reaching overflow point.
Fluid control valve to shut off dispensing immediately.
Large transparent tank to see through fluid level.
Attention Before Operating
1. Viscosity Range: up to SAE 140
2. Output Capacity: 70 cc / cycle
Wear eye protection and keep skin contact to a minimum. If brake fluid enters eyes rinse with plenty of water and seek medical advice. If swallowed seek medical advice immediately.